created 2005 · complexity basic · author JimD · version 6.0
One of the traditional disconnects between vi and modern graphical environments has been using mouse-driven copy/paste between a terminal or command prompt window, and any other application (for example, a web browser).
Vim has extended vi to allow use of the * register as a reference to the system clipboard. So we can use normal mode commands like:
1G"*yG to copy things into the * register and
"*p to paste text from it. We can also use this * register with the ex yank command, so
:%y * will accomplish the same goal as
gg"*yG (copy all text into the system clipboard so it can be pasted into an X or MS Windows application).
The * register acts just like any of the normal (single letter) registers in vi except that it also refers to the system clipboard in X11 or MS Windows.
I've also found that it's much faster and more reliable than pasting a large body of text into Vim through an xterm. Normally I run Vim under the Linux screen utility and any more than one screen full of text is often corrupted, and large selections (>10KB) take several seconds of gnashing and flashing to finish pasting (almost always corrupted). By contrast, pasting 100KB text using
"*p is very reliable and fast.
I searched though the tips and found only a few passing references to this feature: VimTip71 (implies it's a feature of gvim, but I find it works in console Vim just fine under Linux; I only use gvim under MS Windows). VimTip771 and VimTip964 refer to an extra utility named xclip which is only for X11 and seems to be completely unnecessary for Vim using the * register), and VimTip960 (misses the point but the comments mention it a few times).
VimTip21 is spot on but the title suggests it's for MS Windows only. It also mentions that we can change out settings so the "anonymous" register is aliased to the * register using:
- Note: in vim 7.3.74 and higher you can set
clipboard=unnamedplusto alias unnamed register to the + register, which is the X Window clipboard.
VimTip432 and VimTip600 use the * register in some native Vim code (using @*) without explaining it in general. VimTip448 also uses it (for converting hex to decimal) but explains it in passing. VimTip478 uses it in a function for copying the results of a :g search into the * register. VimTip687 suggests that Mac OS X doesn't implement the * register (yet?) but suggests a workaround using the pbcopy and bppase utilities. VimTip876 also makes passing reference to it.
There are several tips for copying the current filename into the clipboard including: VimTip432, VimTip891, VimTip600 (most of the fuss is resolving forward slashes and backslashes for MS Windows paths).
X11-clipboard support in terminalEdit
Getting Vim to work with the X11 clipboard can be a struggle, at least when you like to run Vim in a terminal. The GUI version of Vim always has clipboard support, however, if you like to use Vim from a terminal, you will have to check for X11-clipboard support.
From the console, type:
% vim --version
If you see "
+xterm_clipboard", you are good to go. If it's "
-xterm_clipboard", you will need to look for a version of Vim that was compiled with clipboard support. I have found that the Vim that ships with Ubuntu has clipboard support (not vim-tiny, you need vim-gnome or vim-gtk), but the one with Redhat/CentOS does not.
If you are running Redhat/CentOS, you can install the vim-X11 package (if you have gvim then this is already installed). This provides the vimx command, which is a console version of Vim with X11-clipboard support. I like aliasing Vim to vimx by adding this line to my .bashrc/.cshrc:
.bashrc or .zshrc: if [ -e /usr/bin/vimx ]; then alias vim='/usr/bin/vimx'; fi .cshrc: if (-e /usr/bin/vimx) alias vim '/usr/bin/vimx'
If you are running Gentoo, emerge vim with the 'vim-with-x' USE flag.
Some basic clipboard commands:
"+2yy– copy two lines to X11 clipboard
"+dd– cut line to X11 clipboard
"+p– paste X11 clipboard
Under Windows, the * and + registers are equivalent. For X11 systems, though, they differ. For X11 systems, * is the selection, and + is the cut buffer (like clipboard).
Text selected, or otherwise highlighted in one X11 app is available in the selection buffer, and text explicitly copied or cut is available in the cut buffer.
All my inter-window copy & paste to gvim is handled by the <F7> key. This works for all OSes only for gvim.
"copy vmap <F7> "+ygv"zy`> "paste (Shift-F7 to paste after normal cursor, Ctrl-F7 to paste over visual selection) nmap <F7> "zgP nmap <S-F7> "zgp imap <F7> <C-r><C-o>z vmap <C-F7> "zp`] cmap <F7> <C-r><C-o>z "copy register autocmd FocusGained * let @z=@+
The + and * registers do not work running Vim under cygwin without an X session (for instance running Vim directly from a cmd or rxvt window). They also don't work under Mac OS X using Vim from the command line (via Terminal.app or iTerm.app). This should be documented (as should work-arounds).
- For such systems, fakeclip plugin provides comprehensive and extensible emulation for the clipboard registers.
If you're having trouble with GVIM on Ubuntu, and it doesn't seem to be doing what everybody is saying it should, try closing it completely and reopening. It's supposed to "just work" in the case of copy-paste integration with the system clipboard, especially if you use GVIM's GUI buttons or menus. However, sometimes it just stops working, and you have to close and reopen.
The Ubuntu vim-gtk package contains the +xterm_clipboard option, while the standard vim package does not ...
If for some reason your version of vim under Unix-like system has no support for clipboard, you can use a handy utility called xsel. Xsel lets you manipulate X selections (check man xsel for more info). To work around the lack of clipboard I use following mappings:
" Copy to X CLIPBOARD map <leader>cc :w !xsel -i -b<CR> map <leader>cp :w !xsel -i -p<CR> map <leader>cs :w !xsel -i -s<CR> " Paste from X CLIPBOARD map <leader>pp :r!xsel -p<CR> map <leader>ps :r!xsel -s<CR> map <leader>pb :r!xsel -b<CR>
So, to paste from X clipboard, you use :r!xsel -p|-s|-b depending which X clipboard you want to access. To copy, use
:w!xsel -i -p|-s|-b.
This was recently added, but there is no indication why it is useful or needed. I have moved it here for now because to my knowledge the normal clipboard access commands should work and are much more desireable.
--Fritzophrenic 17:30, November 8, 2010 (UTC)
I am running ubuntu 10.04 with vim-gtk. The * register works as described for gvim but not the command line. vim --version does show the " +xterm_clipboard" option. This is version 7.2.
I have found using the autocutsel package on X11 in conjunction with set clipboard=unnamed provides a seamless experience.
Simple work around for X clipboardsEdit
There is a convenient work around to create a few commands for pasting/copying selections into/out of various X11 clipboards with `xsel`.
:command -range Cz :silent :<line1>,<line2>w !xsel -i -b :command -range Cx :silent :<line1>,<line2>w !xsel -i -p :command -range Cv :silent :<line1>,<line2>w !xsel -i -s :cabbrev cv Cv :cabbrev cz Cz :cabbrev cx Cx :command -range Pz :silent :r !xsel -o -b :command -range Px :silent :r !xsel -o -p :command -range Pv :silent :r !xsel -o -s :cabbrev pz Pz :cabbrev px Px :cabbrev pv Pv
With this code blob dumped in your ~/.vimrc you can do the following
1. Select a blob of text in visual mode 2. Step into command line with ':' 3. :`<,`>cz
and your selected text will be copied into one of X's 3 default clipboards.
there are 6 commands, 3 for pasting, 3 for copying, and each command represents a buffer.
z = "X11-Clipboard" x = "X11 Primary Selection" v = "X11 Secondary Selection"
DISPLAY environment variable on Linux systemsEdit
Make sure your DISPLAY environment variable is set appropriately - otherwise vim can not connect to your x-session to access the clipboard.
To check run:
which should output something like: