Tip 1628 Printable Monobook Previous Next
created 2009 · complexity basic · author Spiiph · version 7.0
This is a sample vimrc file that offers an alternative to the vimrc_example.vim delivered with Vim. It was created in discussion with the ops and regulars of the #vim community. When starting to use Vim, you should create a vimrc; either this sample, vimrc_example.vim, or another "minimal" vimrc should be copied as a starting-point for your own vimrc.
Requirements and caveats
The code in this example .vimrc requires a full featured Vim. While it is possible to insert checks to omit some settings for Vim binaries with fewer features, that would make the file more complex and hard to understand.
If your Vim does not support some of the options and features suggested here, you will have to install a Vim package with a larger feature set, or upgrade to a newer version of Vim.
Usage recommendations
This is a minimal, but feature rich, .vimrc that aims to satisfy the majority of new and intermediate Vim users. While you may use this example as your .vimrc out-of-the-box, it is important to understand what the options and features do. It contains features and options that almost all Vim users should have at least basic knowledge about.
Example vimrc
| " An example for a vimrc file. |
| " |
| " Maintainer: Bram Moolenaar <Bram@vim.org> |
| " Last change: 2015 Mar 24 |
| " |
| " To use it, copy it to |
| " for Unix and OS/2: ~/.vimrc |
| " for Amiga: s:.vimrc |
| " for MS-DOS and Win32: $VIM\_vimrc |
| " for OpenVMS: sys$login:.vimrc |
| " When started as "evim", evim.vim will already have done these settings. |
| if v:progname =~? "evim" |
| finish |
| endif |
| " Use Vim settings, rather than Vi settings (much better!). |
| " This must be first, because it changes other options as a side effect. |
| set nocompatible |
| " allow backspacing over everything in insert mode |
| set backspace=indent,eol,start |
| if has("vms") |
| set nobackup " do not keep a backup file, use versions instead |
| else |
| set backup " keep a backup file (restore to previous version) |
| set undofile " keep an undo file (undo changes after closing) |
| endif |
| set history=50 " keep 50 lines of command line history |
| set ruler " show the cursor position all the time |
| set showcmd " display incomplete commands |
| set incsearch " do incremental searching |
| " For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries |
| " let &guioptions = substitute(&guioptions, "t", "", "g") |
| " Don't use Ex mode, use Q for formatting |
| map Q gq |
| " CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo, |
| " so that you can undo CTRL-U after inserting a line break. |
| inoremap <C-U> <C-G>u<C-U> |
| " In many terminal emulators the mouse works just fine, thus enable it. |
| if has('mouse') |
| set mouse=a |
| endif |
| " Switch syntax highlighting on, when the terminal has colors |
| " Also switch on highlighting the last used search pattern. |
| if &t_Co > 2 || has("gui_running") |
| syntax on |
| set hlsearch |
| endif |
| " Only do this part when compiled with support for autocommands. |
| if has("autocmd") |
| " Enable file type detection. |
| " Use the default filetype settings, so that mail gets 'tw' set to 72, |
| " 'cindent' is on in C files, etc. |
| " Also load indent files, to automatically do language-dependent indenting. |
| filetype plugin indent on |
| " Put these in an autocmd group, so that we can delete them easily. |
| augroup vimrcEx |
| au! |
| " For all text files set 'textwidth' to 78 characters. |
| autocmd FileType text setlocal textwidth=78 |
| " When editing a file, always jump to the last known cursor position. |
| " Don't do it when the position is invalid or when inside an event handler |
| " (happens when dropping a file on gvim). |
| autocmd BufReadPost * |
| \ if line("'\"") >= 1 && line("'\"") <= line("$") | |
| \ exe "normal! g`\"" | |
| \ endif |
| augroup END |
| else |
| set autoindent " always set autoindenting on |
| endif " has("autocmd") |
| " Convenient command to see the difference between the current buffer and the |
| " file it was loaded from, thus the changes you made. |
| " Only define it when not defined already. |
| if !exists(":DiffOrig") |
| command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis |
| \ | wincmd p | diffthis |
| endif |
| if has('langmap') && exists('+langnoremap') |
| " Prevent that the langmap option applies to characters that result from a |
| " mapping. If unset (default), this may break plugins (but it's backward |
| " compatible). |
| set langnoremap |
| endif |
Hide details Change log
fbc1131f0ba5 by Bram Moolenaar <b...@vim.org> on Apr 13, 2015 Diff
Updated runtime files.
| Go to: |
|
|
|
Project members, sign in to write a code review
Older revisions
7b28dc1d756e by Bram Moolenaar <b...@vim.org> on Nov 5, 2014 Diff
c82339d8fdae
by Bram Moolenaar <b...@vim.org>
on Feb 5, 2014
Diff
0877b8d6370e
by Bram Moolenaar <b...@vim.org>
on Apr 28, 2011
Diff
All revisions of this file
File info
Size: 3169 bytes, 102 lines
View raw file
" URL: http://vim.wikia.com/wiki/Example_vimrc
" Authors: http://vim.wikia.com/wiki/Vim_on_Freenode
" Description: A minimal, but feature rich, example .vimrc. If you are a
" newbie, basing your first .vimrc on this file is a good choice.
" If you're a more advanced user, building your own .vimrc based
" on this file is still a good idea.
"------------------------------------------------------------
" Features {{{1
"
" These options and commands enable some very useful features in Vim, that
" no user should have to live without.
" Set 'nocompatible' to ward off unexpected things that your distro might
" have made, as well as sanely reset options when re-sourcing .vimrc
set nocompatible
" Attempt to determine the type of a file based on its name and possibly its
" contents. Use this to allow intelligent auto-indenting for each filetype,
" and for plugins that are filetype specific.
filetype indent plugin on
" Enable syntax highlighting
syntax on
"------------------------------------------------------------
" Must have options {{{1
"
" These are highly recommended options.
" Vim with default settings does not allow easy switching between multiple files
" in the same editor window. Users can use multiple split windows or multiple
" tab pages to edit multiple files, but it is still best to enable an option to
" allow easier switching between files.
"
" One such option is the 'hidden' option, which allows you to re-use the same
" window and switch from an unsaved buffer without saving it first. Also allows
" you to keep an undo history for multiple files when re-using the same window
" in this way. Note that using persistent undo also lets you undo in multiple
" files even in the same window, but is less efficient and is actually designed
" for keeping undo history after closing Vim entirely. Vim will complain if you
" try to quit without saving, and swap files will keep you safe if your computer
" crashes.
set hidden
" Note that not everyone likes working this way (with the hidden option).
" Alternatives include using tabs or split windows instead of re-using the same
" window as mentioned above, and/or either of the following options:
" set confirm
" set autowriteall
" Better command-line completion
set wildmenu
" Show partial commands in the last line of the screen
set showcmd
" Highlight searches (use <C-L> to temporarily turn off highlighting; see the
" mapping of <C-L> below)
set hlsearch
" Modelines have historically been a source of security vulnerabilities. As
" such, it may be a good idea to disable them and use the securemodelines
" script, <http://www.vim.org/scripts/script.php?script_id=1876>.
" set nomodeline
"------------------------------------------------------------
" Usability options {{{1
"
" These are options that users frequently set in their .vimrc. Some of them
" change Vim's behaviour in ways which deviate from the true Vi way, but
" which are considered to add usability. Which, if any, of these options to
" use is very much a personal preference, but they are harmless.
" Use case insensitive search, except when using capital letters
set ignorecase
set smartcase
" Allow backspacing over autoindent, line breaks and start of insert action
set backspace=indent,eol,start
" When opening a new line and no filetype-specific indenting is enabled, keep
" the same indent as the line you're currently on. Useful for READMEs, etc.
set autoindent
" Stop certain movements from always going to the first character of a line.
" While this behaviour deviates from that of Vi, it does what most users
" coming from other editors would expect.
set nostartofline
" Display the cursor position on the last line of the screen or in the status
" line of a window
set ruler
" Always display the status line, even if only one window is displayed
set laststatus=2
" Instead of failing a command because of unsaved changes, instead raise a
" dialogue asking if you wish to save changed files.
set confirm
" Use visual bell instead of beeping when doing something wrong
set visualbell
" And reset the terminal code for the visual bell. If visualbell is set, and
" this line is also included, vim will neither flash nor beep. If visualbell
" is unset, this does nothing.
set t_vb=
" Enable use of the mouse for all modes
set mouse=a
" Set the command window height to 2 lines, to avoid many cases of having to
" "press <Enter> to continue"
set cmdheight=2
" Display line numbers on the left
set number
" Quickly time out on keycodes, but never time out on mappings
set notimeout ttimeout ttimeoutlen=200
" Use <F11> to toggle between 'paste' and 'nopaste'
set pastetoggle=<F11>
"------------------------------------------------------------
" Indentation options {{{1
"
" Indentation settings according to personal preference.
" Indentation settings for using 4 spaces instead of tabs.
" Do not change 'tabstop' from its default value of 8 with this setup.
set shiftwidth=4
set softtabstop=4
set expandtab
" Indentation settings for using hard tabs for indent. Display tabs as
" four characters wide.
"set shiftwidth=4
"set tabstop=4
"------------------------------------------------------------
" Mappings {{{1
"
" Useful mappings
" Map Y to act like D and C, i.e. to yank until EOL, rather than act as yy,
" which is the default
map Y y$
" Map <C-L> (redraw screen) to also turn off search highlighting until the
" next search
nnoremap <C-L> :nohl<CR><C-L>
"------------------------------------------------------------
Comments
Great stuff! Thanks for making my vim-setup usable! :)
/J
Thank you... It is really usefull
-jaY
Thanks!
-Af