Ad blocker interference detected!
Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers
Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.
It can be hard to maintain consistent use of whitespace characters (space and tab). You may not want spaces before tabs, or trailing whitespace at the end of a line. Sometimes you may want to avoid tabs, or just see where tabs occur.
This tip shows several ways to highlight unwanted whitespace. In addition, the tip explains how to use the
listchars option (abbreviated to
lcs) to indicate when characters are not displayed on long lines.
Highlighting with a searchEdit
For occasional use, you can simply search using a suitable pattern to highlight what you want. The following examples assume you use search highlighting (
" Show all tabs: /\t " Show trailing whitespace: /\s\+$ " Show trailing whitespace only after some text (ignores blank lines): /\S\zs\s\+$ " Show spaces before a tab: / \+\ze\t
Highlighting with the match commandEdit
:match command specifies the name of a highlight group and a pattern. Any text matching the pattern will be displayed in the foreground and background colors defined by the highlight group. :help :match :help :2match
:highlight ExtraWhitespace ctermbg=red guibg=red " The following alternative may be less obtrusive. :highlight ExtraWhitespace ctermbg=darkgreen guibg=lightgreen " Try the following if your GUI uses a dark background. :highlight ExtraWhitespace ctermbg=darkgreen guibg=darkgreen
However, be aware that future colorscheme commands may clear all user-defined highlight groups. Using,
:autocmd ColorScheme * highlight ExtraWhitespace ctermbg=red guibg=red
before the first colorscheme command will ensure that the highlight group gets created and is not cleared by future colorscheme commands. :help :colorscheme
Once this highlight group is created, it can be associated with matching text as in the following examples.
" Show trailing whitespace: :match ExtraWhitespace /\s\+$/ " Show trailing whitespace and spaces before a tab: :match ExtraWhitespace /\s\+$\| \+\ze\t/ " Show tabs that are not at the start of a line: :match ExtraWhitespace /[^\t]\zs\t\+/ " Show spaces used for indenting (so you use only tabs for indenting). :match ExtraWhitespace /^\t*\zs \+/ " Switch off :match highlighting. :match
Alternatively, the following pattern will match trailing whitespace, except when typing at the end of a line.
:match ExtraWhitespace /\s\+\%#\@<!$/
If you use this alternate pattern, you may want to consider using the following autocmd to let the highlighting show up as soon as you leave insert mode after entering trailing whitespace:
:autocmd InsertLeave * redraw!
Or alternatively, the following can be used:
:au InsertEnter * match ExtraWhitespace /\s\+\%#\@<!$/ :au InsertLeave * match ExtraWhitespace /\s\+$/
which does not "flash" the screen.
:match highlighting applies only to the current window. With the following in your vimrc, the command will be applied to the first window, and to any subsequent windows. The pattern
* applies the highlight to all files.
" Show leading whitespace that includes spaces, and trailing whitespace. :autocmd BufWinEnter * match ExtraWhitespace /^\s* \s*\|\s\+$/
Rather than an autocmd, you may prefer a mapping. With the following, and the default backslash Leader key, you can type
\wn to switch highlighting on, and
\wf to switch it off.
:nnoremap <Leader>wn :match ExtraWhitespace /^\s* \s*\<Bar>\s\+$/<CR> :nnoremap <Leader>wf :match<CR>
With Vim 7.1.40 and later, you can use the
matchadd() function to define matches (making the
:match command available for other purposes). See Highlight long lines for examples.
If your goal is to:
- highlight trailing whitespace in red
- have this highlighting not appear whilst you are typing in insert mode
- have the highlighting of whitespace apply when you open new buffers
then the following 6 commands are what you should put into your .vimrc. They are all listed on this page in separate sections, but this is a consolidated list of precisely what you need.
highlight ExtraWhitespace ctermbg=red guibg=red match ExtraWhitespace /\s\+$/ autocmd BufWinEnter * match ExtraWhitespace /\s\+$/ autocmd InsertEnter * match ExtraWhitespace /\s\+\%#\@<!$/ autocmd InsertLeave * match ExtraWhitespace /\s\+$/ autocmd BufWinLeave * call clearmatches()
Highlighting with the syntax commandEdit
:match command is easy, but you may want to keep it for another purpose. An alternative is to use syntax highlighting. :help syntax
Here is an example using one of the patterns shown earlier. Put this in your vimrc, after the command
:syntax on (which you may already have). Of course you would also need to define
ExtraWhitespace with a
:highlight command, as shown earlier.
" Show trailing whitepace and spaces before a tab: :autocmd Syntax * syn match ExtraWhitespace /\s\+$\| \+\ze\t/
If you want the above command to also work if the match is nested in some other syntax group, append
containedin=ALL to the end.
Using the list and listchars optionsEdit
'list' is a boolean option that defaults to off. If
'list' is on, whitespace characters are made visible. The
'listchars' option can be used to customize the way whitespace characters are shown. The default displays "
^I" for each tab, and "
$" at each EOL (end of line, so trailing whitespace can be seen). :help 'list'
:set list displays whitespace, while
:set nolist displays normally. It is convenient to use
:set list! to toggle the option on, so that you can later press
: followed by the up arrow to repeat the previous command, to toggle
The following example toggles
list, then sets
listchars to not display an end-of-line character, and to display
> for the first character occupied by a tab, and
- for any subsequent characters that the tab may occupy.
:set list! :set listchars=tab:>-
Here are some alternatives that you can try (each sets
listchars in one command):
:set list listchars=tab:>-,trail:.,extends:> " Enter the middle-dot by pressing Ctrl-k then .M :set list listchars=tab:\|_,trail:· " Enter the right-angle-quote by pressing Ctrl-k then >> :set list listchars=tab:»·,trail:· " Enter the Pilcrow mark by pressing Ctrl-k then PI :set list listchars=tab:>-,eol:¶ " The command :dig displays other digraphs you can use.
The listchars option uses the "NonText" highlighting group for "eol", "extends" and "precedes", and the "SpecialKey" highlighting group for "nbsp", "tab" and "trail". :help 'listchars'
Using syntax space errorsEdit
Vim has several syntax files that support the display of "space errors". For example, for the C programming language (
:set filetype=c), you could put the following in your vimrc:
let c_space_errors = 1
Supported languages are: ada, c, chill, csc, forth, groovy, icon, java, lpc, mel, nqc, nroff, ora, pascal, plm, plsql, python and ruby. The c settings also apply to cpp.
To highlight space errors in java files, you would use:
let java_space_errors = 1
For C, if you don't want to see trailing space errors at end-of-line set:
let c_no_trail_space_error = 1
If you only use spaces to indent, and don't want to see space errors in front of tabs:
let c_no_tab_space_error = 1
If you are interested in learning more, open the syntax file for C (in Vim, put the cursor on the path
$VIMRUNTIME/syntax/c.vim and type
gf). Then look for the definition of the highlight group
cSpaceError (near the end of the file). That group specifies the color used to display space errors in C files. The command
:hi cSpaceError will show "xxx" in that color.
Showing long linesEdit
By default, lines longer than the screen width are not wrapped, and you can horizontally scroll the text, for example by moving the cursor to the end of a long line. Therefore there may be characters preceding the visible text (non-displayed characters on the left), and there may be characters that extend after the visible text (non-displayed characters on the right). The
listchars option can be used to show a highlighted symbol when characters are not displayed, for example:
" Show < or > when characters are not displayed on the left or right. :set list listchars=precedes:<,extends:> " Same, but also show tabs and trailing spaces. :set list listchars=tab:>-,trail:.,precedes:<,extends:>
Resolving performance problemsEdit
It seems that vim does not handle sucessive calls of the match command gracefully. Since BufWinEnter commands are executed every time a buffer is displayed (i.e., switching to another file), the match command is executed many times during a vim session. This seems to lead to a memory leak which slowly impacts performance (for example scrolling and writing become unbearably slow). Include the following line to fix the issue:
autocmd BufWinLeave * call clearmatches()
NOTE: Versions < 7.2
While I would suggest you keep your VIM up to date, there are reasons why maybe you cannot. To avoid errors you could modify part of the settings above to make sure clearmatches() is an available function (apparently available in 7.2+).
if version >= 702 autocmd BufWinLeave * call clearmatches() endif
- Highlight some whitespace characters a script to toggle specified highlighting
- Converting tabs to spaces to convert tabs to spaces or vice versa
- Remove unwanted spaces to display or remove unwanted spaces
- Remove unwanted empty lines to delete blank lines
- cream-showinvisibles plugin for attractive display of tabs, returns and trailing spaces
- The ShowTrailingWhitespace plugin highlights without affecting syntax or :match command, and comes with exceptions for certain filetypes.
- The JumpToTrailingWhitespace plugin provides corresponding movement commands to quickly locate trailing whitespace.
- The smartmatcheol.vim plugin highlights based on file extension or name.
- The trailing-whitespace plugin uses :match.
- The bad-whitespace plugin uses :match, allows on/off/toggling via commands.
- The Trailer Trash plugin uses :match.
- The DynamicSigns plugin can show whitespace errors (also mixed indent) in the sign column.
If you want to leave
:match available for other uses and still have the match change when you enter or leave Insert mode, then you can use the following snippet.
highlight ExtraWhitespace ctermbg=red guibg=red augroup WhitespaceMatch " Remove ALL autocommands for the WhitespaceMatch group. autocmd! autocmd BufWinEnter * let w:whitespace_match_number = \ matchadd('ExtraWhitespace', '\s\+$') autocmd InsertEnter * call s:ToggleWhitespaceMatch('i') autocmd InsertLeave * call s:ToggleWhitespaceMatch('n') augroup END function! s:ToggleWhitespaceMatch(mode) let pattern = (a:mode == 'i') ? '\s\+\%#\@<!$' : '\s\+$' if exists('w:whitespace_match_number') call matchdelete(w:whitespace_match_number) call matchadd('ExtraWhitespace', pattern, 10, w:whitespace_match_number) else " Something went wrong, try to be graceful. let w:whitespace_match_number = matchadd('ExtraWhitespace', pattern) endif endfunction