Wikia

Vim Tips Wiki

Changes: Selecting your pasted text

Edit

Back to page

(use better method from Jürgen Krämer at vim_use (works if yank in one buffer and paste in another))
(Change <tt> to <code>, perhaps also minor tweak.)
Line 13: Line 13:
 
Here is an easy way to select the text you just pasted. For example, you may want to paste some text, then select it for [[Shifting blocks visually|indenting]], or formatting, or performing a [[Search and replace in a visual selection|substitution]].
 
Here is an easy way to select the text you just pasted. For example, you may want to paste some text, then select it for [[Shifting blocks visually|indenting]], or formatting, or performing a [[Search and replace in a visual selection|substitution]].
   
A simple procedure would be to press <tt>`[</tt> to jump to the start of the text you last changed. For example, you may use <tt>ciw</tt> to change inner word, or <tt>p</tt> to paste, then scroll elsewhere. Typing <tt>`[</tt> would jump to the start of the word you just changed, or to the start of the text you just pasted (see [[Using marks|marks]]).
+
A simple procedure would be to press <code>`[</code> to jump to the start of the text you last changed. For example, you may use <code>ciw</code> to change inner word, or <code>p</code> to paste, then scroll elsewhere. Typing <code>`[</code> would jump to the start of the word you just changed, or to the start of the text you just pasted (see [[Using marks|marks]]).
   
 
To select the last changed text (or the text that was just pasted), use a mapping like this in your [[vimrc]]:
 
To select the last changed text (or the text that was just pasted), use a mapping like this in your [[vimrc]]:
Line 20: Line 20:
 
</pre>
 
</pre>
   
After pasting, type <tt>gp</tt> to select the pasted text in visual mode. This is similar to the standard <tt>gv</tt> which you can type to select the last visually-selected text.
+
After pasting, type <code>gp</code> to select the pasted text in visual mode. This is similar to the standard <code>gv</code> which you can type to select the last visually-selected text.
   
 
Following is a more elaborate alternative:
 
Following is a more elaborate alternative:
Line 27: Line 27:
 
</pre>
 
</pre>
   
With this alternative, typing <tt>gp</tt> will select the last changed (or pasted) text, and the visual mode will be the same as was last used. For example, you may press <tt>v</tt> to start character-wise visual selection, then move the cursor and press <tt>y</tt> to yank (copy) the selected text. Elsewhere, you may press <tt>p</tt> to paste the text. In that case typing <tt>gp</tt> would select the pasted text character-wise.
+
With this alternative, typing <code>gp</code> will select the last changed (or pasted) text, and the visual mode will be the same as was last used. For example, you may press <code>v</code> to start character-wise visual selection, then move the cursor and press <code>y</code> to yank (copy) the selected text. Elsewhere, you may press <code>p</code> to paste the text. In that case typing <code>gp</code> would select the pasted text character-wise.
   
Repeating this example, but using <tt>V</tt> would use line-wise visual selection (whole lines would be selected). Similarly, using Ctrl-V (or Ctrl-Q if you use Ctrl-V for pasting) would use block-wise visual selection.
+
Repeating this example, but using <code>V</code> would use line-wise visual selection (whole lines would be selected). Similarly, using Ctrl-V (or Ctrl-Q if you use Ctrl-V for pasting) would use block-wise visual selection.
   
The mapping uses "<tt><expr></tt>" which means that when you type <tt>gp</tt>, the mapping is evaluated as an expression, then the result is used. The dot operator (<tt>.</tt>) is used to concatenate three strings. The first string (without quotes) is <tt>`[</tt> and the third string is <tt>`]</tt>. The second string is the first character ({{help|strpart()}}) of the result from calling <tt>getregtype()</tt> which is the "type" of the last register used in a normal mode command. The type is 'v', 'V', or Ctrl-V depending on whether the text in the register resulted, respectively, from a character, a line, or a block operation. ({{help|getregtype()}})
+
The mapping uses "<code><expr></code>" which means that when you type <code>gp</code>, the mapping is evaluated as an expression, then the result is used. The dot operator (<code>.</code>) is used to concatenate three strings. The first string (without quotes) is <code>`[</code> and the third string is <code>`]</code>. The second string is the first character ({{help|strpart()}}) of the result from calling <code>getregtype()</code> which is the "type" of the last register used in a normal mode command. The type is 'v', 'V', or Ctrl-V depending on whether the text in the register resulted, respectively, from a character, a line, or a block operation. ({{help|getregtype()}})
   
For example, if you type <tt>yiw</tt> to copy a word, the function <tt>getregtype()</tt> will return <tt>v</tt>, and the result of the mapping expression will be <tt>`[v`]</tt> (the same as the first mapping given above). However, if you type <tt>3Y</tt> to copy three lines, the result will be <tt>`[V`]</tt> (linewise).
+
For example, if you type <code>yiw</code> to copy a word, the function <code>getregtype()</code> will return <code>v</code>, and the result of the mapping expression will be <code>`[v`]</code> (the same as the first mapping given above). However, if you type <code>3Y</code> to copy three lines, the result will be <code>`[V`]</code> (linewise).
   
 
==References==
 
==References==

Revision as of 05:46, July 13, 2012

Tip 759 Printable Monobook Previous Next

created 2004 · complexity basic · version 6.0


Here is an easy way to select the text you just pasted. For example, you may want to paste some text, then select it for indenting, or formatting, or performing a substitution.

A simple procedure would be to press `[ to jump to the start of the text you last changed. For example, you may use ciw to change inner word, or p to paste, then scroll elsewhere. Typing `[ would jump to the start of the word you just changed, or to the start of the text you just pasted (see marks).

To select the last changed text (or the text that was just pasted), use a mapping like this in your vimrc:

nnoremap gp `[v`]

After pasting, type gp to select the pasted text in visual mode. This is similar to the standard gv which you can type to select the last visually-selected text.

Following is a more elaborate alternative:

nnoremap <expr> gp '`[' . strpart(getregtype(), 0, 1) . '`]'

With this alternative, typing gp will select the last changed (or pasted) text, and the visual mode will be the same as was last used. For example, you may press v to start character-wise visual selection, then move the cursor and press y to yank (copy) the selected text. Elsewhere, you may press p to paste the text. In that case typing gp would select the pasted text character-wise.

Repeating this example, but using V would use line-wise visual selection (whole lines would be selected). Similarly, using Ctrl-V (or Ctrl-Q if you use Ctrl-V for pasting) would use block-wise visual selection.

The mapping uses "<expr>" which means that when you type gp, the mapping is evaluated as an expression, then the result is used. The dot operator (.) is used to concatenate three strings. The first string (without quotes) is `[ and the third string is `]. The second string is the first character (:help strpart()) of the result from calling getregtype() which is the "type" of the last register used in a normal mode command. The type is 'v', 'V', or Ctrl-V depending on whether the text in the register resulted, respectively, from a character, a line, or a block operation. (:help getregtype())

For example, if you type yiw to copy a word, the function getregtype() will return v, and the result of the mapping expression will be `[v`] (the same as the first mapping given above). However, if you type 3Y to copy three lines, the result will be `[V`] (linewise).

References

Comments

Around Wikia's network

Random Wiki